Materials
Stainless steel, mild steel, aluminium and brass subject to process review.

Architectural Metalwork
Metal signage components, letters and backing panels.
Manufacturing scope
Signage components are laser cut and formed from approved artwork, with finish and fixing method agreed before production.
Illustrative geometry; final design follows your approved drawing.Technical review
Stainless steel, mild steel, aluminium and brass subject to process review.
Laser cutting, CNC bending and welding, with specialist finishes coordinated externally.
Artwork fidelity, visible edges, finish and fixing positions.
Typical customers: Interior contractors, architects and signage makers.
PVD, powder coating and specialist finishes are coordinated with approved external suppliers where needed. Site installation and structural design are scoped separately.
Related products
Product data
Letters, logos and backing panels are laser-cut from your artwork and finished for indoor or outdoor display.
Used in
Flat or with return edges
Cut-through or layered
Folded trays
Name and building plaques
| Thickness | 1 – 6 mm typical |
|---|---|
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Finish | Brushed, polished, powder coat or PVD |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless (Cr-Mn)
ASTM A240 / A666 · EN 1.4373
Lower-nickel stainless for indoor and decorative parts where 304 corrosion resistance is not required.
| Tensile strength | ≥ 620 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 260 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 100 HRB |
| Density | 7.80 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | ≈ 16 W/m·K |
| Elastic modulus | 200 GPa |
Aluminium alloy
ASTM B209 · EN AW-5052
Bends well and resists corrosion. The usual aluminium for formed housings, chassis and panels.
| Tensile strength | 215 – 265 MPa |
|---|---|
| Yield strength | ≥ 160 MPa |
| Elongation | 7 – 12 % |
| Hardness | ≈ 60 HB |
| Density | 2.68 g/cm³ |
|---|---|
| Melting range | 607 – 649 °C |
| Thermal conductivity | 138 W/m·K |
| Elastic modulus | 70 GPa |
Copper alloy
IS 410 · CuZn37 (C27200)
Decorative and electrical parts. Laser-cutting thickness is confirmed per job.
| Tensile strength | ≈ 340 – 450 MPa |
|---|---|
| Yield strength | ≈ 150 – 350 MPa |
| Elongation | ≈ 10 – 50 % |
| Hardness | ≈ 60 – 120 HV |
| Density | 8.44 g/cm³ |
|---|---|
| Melting range | 900 – 920 °C |
| Thermal conductivity | ≈ 120 W/m·K |
| Elastic modulus | ≈ 105 GPa |
Carbon steel
IS 513 (CR1–CR4) · DC01–DC04
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common choices are Stainless steel 304, Stainless steel 202, Aluminium 5052-H32, Brass, CRCA mild steel. Other grades are quoted on request.
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Share the basics now. We follow up for the drawing and any details we need.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp