
Electrical Enclosures
Distribution & Meter Boxes
Sheet-metal DB and meter box bodies, doors and gland plates made to your layout.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
DB and meter box bodies are cut from sheet, CNC-bent and welded to your layout, with door, hinge, lock and gland positions taken from the approved drawing.
- Single- and three-phase DB bodies
- Meter boxes with viewing windows
- Hinged doors and removable covers
- Gland plates and DIN-rail mounting plates
Product data
Distribution & Meter Boxes: specifications
Distribution board and meter box bodies made to your layout, from small single-phase boxes to three-phase DB enclosures with gland plates, DIN-rail mounting and hinged doors.
Used in
- Building electrical contractors
- Panel builders
- Infrastructure projects
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 3 grades listed
- 01
Single-phase DB
Surface or flush mounting
- 02
Three-phase TPN DB
With busbar and neutral link space
- 03
Meter boxes
Single or multi-meter, with viewing window
- 04
Feeder pillars (bodies)
Outdoor bodies with plinth
| Typical size range | 200 × 300 × 100 mm up to 1000 × 800 × 300 mm |
|---|---|
| Sheet thickness | 1.2 – 2.0 mm |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
| Order size | Prototype, pilot and repeat batches |
Carbon steel
CRCA mild steel
IS 513 (CR1–CR4) · DC01–DC04
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
Galvanised steel (GI / GP)
IS 277 · coating Z120 – Z275
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
Stainless steel 304
ASTM A240 · EN 1.4301
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common questions
Which materials can you use for distribution & meter boxes?
Common choices are CRCA mild steel, Galvanised steel (GI / GP), Stainless steel 304. Other grades are quoted on request.
What sizes of distribution & meter boxes can you make?
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Do you make distribution & meter boxes in small batches?
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Distribution & Meter Boxes
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.