Materials
Mild steel, SS 304 / 316 and aluminium as specified.

Electrical Enclosures
Fabricated control panel and cabinet bodies, doors and internal partitions.
Manufacturing scope
Cabinet bodies, doors, roofs, base frames and internal partitions are developed around your component layout, cable routing and access requirements.
Design example; final design follows your approved drawing.Technical review
Mild steel, SS 304 / 316 and aluminium as specified.
Laser cutting of panels and cutouts, long CNC bends up to 3200 mm working length, welded or fastened body construction.
Door alignment, squareness, hinge and lock positions, mounting dimensions and agreed sealing provisions.
Typical customers: Panel builders, switchgear assemblers and electrical OEMs.
Scope covers mechanical fabrication. Electrical fit-out, IP ratings and other approvals require a separately agreed specification and verification.
Related products
Product data
Control panel and cabinet bodies are folded from sheet, welded and finished to your panel layout, with doors, mounting plates, roof, base frame and internal partitions supplied as one kit.
Used in
Single door with mounting plate
Single or double door with plinth
Internal partitions and compartment doors
Sloped front with removable panels
| Typical size range | Up to 2000 mm high per section; wider suites in bolted sections |
|---|---|
| Sheet thickness | 1.6 – 2.0 mm (body), 2.5 – 3 mm (mounting plate, plinth) |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
| Order size | Prototype, pilot and repeat batches |
Carbon steel
IS 513 (CR1–CR4) · DC01–DC04
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
IS 277 · coating Z120 – Z275
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless
ASTM A240 · EN 1.4401 / 1.4404
2 – 3 % molybdenum for better resistance to chlorides and cleaning chemicals. Used for food, pharma and coastal sites.
| Tensile strength | ≥ 515 MPa (316L ≥ 485) |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa (316L ≥ 170) |
| Elongation | ≥ 40 % |
| Hardness | ≤ 95 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1375 – 1400 °C |
| Thermal conductivity | 16.3 W/m·K |
| Elastic modulus | 193 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
| H × W × D (mm) | Construction | Typical use |
|---|---|---|
| 600 × 400 × 200 | Wall-mount, single door | Small control |
| 800 × 600 × 250 | Wall-mount, single door | Motor control |
| 1200 × 800 × 300 | Floor / wall, single door | PLC panels |
| 1800 × 800 × 400 | Floor-standing | MCC sections |
| 2000 × 1200 × 600 | Floor-standing, double door | Distribution / drives |
Cut-outs for meters, fans, windows and switches are made from your general-arrangement drawing.
Questions
Single bends up to 3200 mm long on our 100-ton, five-axis press brake and flat blanks up to 1500 x 3000 mm. Taller cabinets are made in welded or bolted sections.
No. We make the sheet metal: cabinet bodies, doors, partitions, plinths, gland and mounting plates. Panel builders do the wiring and electrical assembly.
Yes. Powder coating is done through approved suppliers, so you receive finished cabinet bodies on one purchase order.
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Share the basics now. We follow up for the drawing and any details we need.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp