Taloja MIDC, Panvel · Sheet metal fabrication since 1996

Fibre laser cutting a profile into steel sheet
Open electrical cabinet with a removable mounting panel
Press brake tooling forming a long sheet metal flange
Hex nuts, bolts and socket-head screws

Sheet metal fabrication for OEMs · Since 1996

Sheet metal parts made to your drawing

Laser-cut, CNC-bent and welded components, brackets and subassemblies, from prototype approval to repeat production batches.

01 / 04
In-house routeCut · Bend · Weld · Finish
Made to your drawingPrototype to repeat batches
  • Laser cutting
  • CNC bending
  • Welding
  • Finishing
Grinding a fabricated steel part
Edge finishing

About us

One factory. Cut, bend, weld and finish.

A three-generation family business since 1996. Our 550 m² unit in Taloja MIDC runs fibre laser cutting, five-axis CNC bending, welding and finishing in-house. Your parts follow one coordinated route on one purchase order, from drawing review to repeat batches.

About Vinay Metal
1996Metalworking since, in Taloja MIDC
3 kWFibre laser · 1500 × 3000 mm bed
100 tFive-axis CNC press brake, 3200 mm
Cnc press brake forming steel
Press brake forming

Our products

Products made to your drawing

Enclosures, machine housings, brackets and welded subassemblies across six product families. Each part is quoted against your drawing revision, material and batch size.

Fibre laser head cutting a steel sheet
3200 mmbending length on the five-axis press brake
0.1 mmpress brake positioning accuracy

One supplier = one purchase order

Cutting, bending, welding and finishing are planned as one requirement, so your parts follow one coordinated route from flat blank to finished assembly.

Fibre laser head cutting a steel sheet

Drawing-led, not guesswork

Materials, interfaces and inspection points are reviewed against your drawing revision before production starts.

Control cabinet enclosure design example

Repeat batches match the sample

Tooling, bend sequence and setup are recorded on the five-axis press brake, so repeat orders follow the approved sample.

Cnc press brake forming steel

Clear scope before production

Prototype approval, batch size, finishing and delivery requirements are agreed up front. Ratings and certifications are confirmed separately in the quotation.

Grinding a fabricated steel part

Capacity check

Can we make your part?

Pick the material and enter the thickness and longest bend. You get an instant check against our machine limits.

Laser cutting

Sheet size

Flat blanks up to 1500 × 3000 mm

Bend length

Send the drawing for review

A quick guide only. Bend tonnage depends on material, thickness, die and length, so every part is confirmed on the drawing.

Fastener manufacturing · since 1996

Stainless fasteners, made in-house

We manufacture bolts, nuts, screws, washers and studs in SS 202, 304, 310 and 316 to DIN, ISO, IS and BS, in standard patterns or to your drawing.

Full fastener range
Bolts stainless fastener examples

Bolts

Hexagon bolts carry most structural and machine joints. Full-thread (DIN 933) suits short grips and general fixing; part-thread (DIN 931) gives a plain shank for shear loads.

  • DIN 933
  • DIN 931
  • BS 1083
  • DIN 6921
  • DIN 603
Size rangeM3 – M48GradesSS 304 · SS 316 · SS 202
View bolts

How we work

From drawing to repeat batch

  1. DXF, DWG, STEP or PDF with revision, material, quantity and finish.

  2. We check bends, cut-outs and welds against our machines and reply with a quotation.

  3. A first-off or sample batch is made and checked against your drawing.

  4. Bend programs and setups are recorded so repeat batches match the sample.

Materials

Grades we cut, bend and weld

Typical mechanical and physical properties, with our laser cutting limit for each grade.

Carbon steel

CRCA mild steel

IS 513 (CR1–CR4) · DC01–DC04

Laser cut
up to 20 mm
Max sheet
1500 × 3000 mm

Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.

Mechanical properties
Tensile strength270 – 410 MPa
Yield strength≤ 280 MPa (grade dependent)
Elongation28 – 38 %
Hardness≈ 50 – 65 HRB
Physical properties
Density7.85 g/cm³
Melting range1450 – 1520 °C
Thermal conductivity≈ 50 W/m·K
Elastic modulus200 GPa

Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.

Questions

Asked before a first order

What should I send for a quotation?

A drawing or DXF with revision, material grade and thickness, quantity, finish and the delivery date. A STEP file helps for formed and welded parts.

What is the largest part you can make?

Flat parts up to 1500 × 3000 mm from one sheet, and bends up to 3200 mm long on the 100-ton press brake. Larger assemblies are made in welded or bolted sections.

How thick can you cut?

On the 3 kW fibre laser: mild steel up to 20 mm, stainless steel up to 12 mm, and aluminium and copper up to 6 mm.

Do you make prototypes and small batches?

Yes. We make prototypes for approval, then repeat batches using the recorded bend programs and setups from the approved sample.

Can you do powder coating or plating?

Deburring, grinding and polishing are done in-house. Powder coating, plating and PVD are coordinated with approved suppliers, so you can order finished parts on one purchase order.

Do you manufacture fasteners as well?

Yes. We have manufactured stainless steel bolts, nuts, screws, washers and studs since 1996, in DIN, ISO, IS and BS patterns, in our own fastener manufacturing setup.

Quick quote

Get a quote in one step

Share the basics now. We reply with a quotation or questions on your drawing.

  • Reply with a quotation for prototypes or batches
  • Reference number by email as soon as you send
  • Or call Daksh Shah on +91 90823 86814

Quote checklist

Tap what you already have

0 of 6 ready
  1. Cut3 kW fibre laser
  2. Bend100 t, 3200 mm
  3. WeldLaser · TIG · arc
  4. FinishGrind · polish

Have a drawing ready? Send it for a quote.

Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.

Request a quote

Send your drawing details

Tell us the part, material, quantity and finish. We review it and reply with a quotation for prototypes or repeat batches.

  • Prototype to repeat batches
  • Laser cutting, CNC bending, welding
  • Reference number by email straight away

Enquiry received

Thank you, for contacting us

We have received your enquiry.

Your reference ID

Quote this reference when you call, email or WhatsApp us. Our team will get back to you shortly.

Vinay Metal Company · +91 90823 86814 · info@vinaymetal.com